TD-SCDMA Physical layer
Introduction
This page describes UTRA Physical Layer or TD-SCDMA Physical layer as per TDD mode. This example is for 1.28Mcps and diagram shows one used for transport channel part.
As shown in teh figure below TD-SCDMA physical layer transmitter covers following modules through which information from layer-2 traverses.
1. CRC and Tail bits addition
2. Transport block concatenation and code block segmentation
3. Channel Coding (CC/Turbo)
4. Radio frame equalization
5. Interleaving
6. Radio Frame Segmentation
7. Rate Matching
8. Multiplexing
9. Bit Scrambling
10.Physical channel mapping
11.Data modulation
12. Spreading
13. complex scrambling
14. Pulse shaping(RRC)
15. IQ modulation
16. RF up conversion and transmission to the channel
Fig.1 TD-SCDMA Physical layer Transmitter
TD-SCDMA 3GPP standard references
3GPP TS 25.222 - multiplexing, channel coding and interleaving.
3GPP TS 25.223 - Spreading and modulation.
3GPP TS 25.224 - Physical layer procedures.
3GPP TS 25.225 - Physical layer measurements.
All the documents can be downloaded from following links:
www.3gpp.org/ftp/specs/archive/25_series/
www.quintillion.co.jp/3GPP/Specs/
Useful Links on TD-SCDMA
TD-SCDMA tutorial Difference between TD-SCDMA,WCDMA and CDMA 2000 TD-SCDMA Chip vendors TD-SCDMA UE conformance testing
Other Standard Physical Layers
• Wireless physical layer overview
• 11b physical layer
• 11a physical layer
• fixed wimax physical layer-OFDM
• mobile wimax physical layer-OFDMA
• 11n physical layer
• GSM Physical layer
• TD-SCDMA Physical layer
• GPRS physical layer
• LDACS1 Physical layer
• 10,40,100 Gigabit Ethernet Physical layer
• Zigbee Physical layer
• WCDMA Physical layer
• Bluetooth Physical layer
• WLAN 802.11ac Physical layer
• WLAN 802.11ad Physical layer
• LTE Physical layer