100Base-T1 vs 1000Base-T1-Difference between 100Base-T1 and 1000Base-T1
This page compares 100Base-T1 vs 1000Base-T1 and mentions difference between 100Base-T1 and 1000Base-T1. Following are the similarities and differences between these two ethernet bus types used in automotive industry.
➨100Base-T1 has been developed to transfer 100 Mbps over single twisted pair of cable,
While 1000Base-T1 has been developed to transfer 1000 Mbps.
➨Both are based on multi-level PAM-3 coding and hence support high data rate with bandwidth of about 600MHz.
➨100Base-T1 PHY is specified under IEEE 802.3bp while 1000Base-T1 PHY is specified
under IEEE 802.3bw standards.
➨100Base-T1 supports point to point connection using
single twisted pair for distance of upto 15 meters.
1000Base-T1 sypports point to point connection using single twisted pair for
distance of 15 meters with copper and upto 40 meters with optical fiber.
➨Both uses same frame sizes (minimum and maximum) as per IEEE 802.3 standard.
➨100Base-T1 supports speed of 100Mbps while 1000Base-T1 supports speed of 1Gbps at MAC/PLS service interfaces.
➨Both maintain BER (Bit Error Rate) of 10-10 ar MAC/PLS interface.
➨Both bus types support full duplex mode only.
➨1000Base-T1 defines energy efficient ethernet as optional specifications for
manufacturers.
Refer features of automotive ethernet and its requirement in automotive vehicles.
What is Difference between
Difference between 100Base-T1 and 1000Base-T1
CAN vs TTCAN
CAN vs TTP
RS232 vs RS422 vs RS485 interface
LIN vs CAN vs FlexRay vs MOST
Difference between MOST25,MOST50,MOST150
Useful interface types
RS232 interface RS485 interface RS422 interface SPI interface CAN interface interface types and converters DigRF interface what is microcontroller microcontroller vs microprocessor microcontroller programming